TRITON - R

BIG BRAKE KIT

Designed for fast road, track and competition

 
 

'TW3' Works as well as it looks.

To create the perfect rotor there needs to be a balance of available friction surface combined with a limited number of slots. Too many slots will leave less friction surface, therefore reducing brake efficiency. This will also cause an excess of pad resin deposits across the friction surface which if left to build-up can lead to 'hot spots'. Resin build-up can become so severe that it can cause brake shudder, pedal pulsation and sever vibration through the steering wheel. It most cases these symptoms are mistaken for rotor runout or a warped disc.

 

Sparta's engineers have studied the ramifications of pad resin build up on the rotor face and the effects it has on the braking system. These studies led to the creation of our patented TW3 (Thermal Window 3) slot design.

By machining our TW3 slot pattern into the face of the rotor, the pad resin spread becomes more even across the friction surface, reducing the chances of hot spots and pad deposits. To further minimize rotor stress, the TW3 slots start and end over the pillars in our patented DCF96 vent pattern, preventing excessive material thickness variations that can lead to cracking in extreme thermal environments.

'DCF96' The new standard for

rotor ventilation

Our patented Dynamic Continuous Flow (DCF96) brake disc vane design has proven to be superior to other designs on the market, addressing many weaknesses found in traditional vane designs. Traditional discs feature vane patterns that are either straight or curved. When heat is applied to a traditional disc, the material will expand both radially and linearly. The linear expansion results in the disc's friction surfaces ballooning outwards, which can cause up to a 30% loss of pad contact with the rotor. Another symptom of this linear expansion manifests as a shudder in the steering wheel or pedal under light braking pressure, commonly attributed to disc thickness variation (DTV).

 

The DCF96 vane design reduces and helps eliminate this linear expansion. The secret is in the vane design, which features 96 strategically placed pillars and posts for advanced heat distribution and DTV minimization. As a disc rotates, ambient air flows through the disc's ventilation channel. The air then circulates around the pillars, helping dissipate the heat and expel it away from the disc. The pockets in the DCF96 design conduct heat away from the friction surface and into the pillars, reducing the disc's linear expansion. The DCF96 vane design is multi-directional, meaning that they can be installed on either side of the vehicle without affecting their cooling efficiency, as opposed to traditional curved vane patterns that lose cooling efficiency if spun in the wrong direction.

 

Aesthetics to match the performance.

While performance, efficiency and reliability has always been at the forefront of Sparta brakes, equally as important is our attention to detail where quality of materials and finish is concerned. 

 

Your guide to brake pad options.

Selecting the correct pad material for the intended application is vital to ensure peak performance and longevity. Learn more about Spartas brake pad range and which are likely to be applicable to your driving style or use. 

SPP1.0 - Street Application

Designed for everyday use our SPP1.0 pad offers a host of features tailored to everyday street use, from early initial bite at low temperature to minimum dust emittance.

Torque

Dust Emittance

Noise

Operating Temperature Range

Hot

High

High

1400F

SPP3.0 - Street / Track Application

Suitable for street use but also able to withstand higher operating temperatures to accommodate track use. Releases more dust than the SPP1.0 but retains a good initial bite. 

Torque

Dust Emittance

Noise

Operating Temperature Range

Hot

High

High

1400F

SRP100 - Race Application (low bite) 

Specifically designed for lightweight vehicle applications or RWD tuning, the SRP100 pad offers a relatively low bite with a flat / declining torque curve. The material is ambient to around 850F. 

Torque

Dust Emittance

Noise

Operating Temperature Range

Hot

High

High

1400F

SRP200 - Race Application (mid bite) 

Unlike the SPP100 the SPP200 pad offers a slowly rising torque curve with a mid-range pad bite. The ambient temperature is also higher at approximately 1100F.

Torque

Dust Emittance

Noise

Operating Temperature Range

Hot

High

High

1400F

SRP300 - Race Application (high bite) 

The SPP300 brake pad has been developed to tackle the harshest braking environments and performs best within high-temperature bands. 

Torque

Dust Emittance

Noise

Operating Temperature Range

Hot

High

High

1400F

 

Our guarantee to you.

All Sparta products are supplied with a twelve month warranty giving the original purchaser peace of mind that every Sparta product will be free from manufacturing defects in workmanship and materials. You can view our complete warranty document here.